Home Blog Page 20

The best salad recipe

0

Truly the best Italian chopped salad recipe, with chopped fresh greens and veggies in a simple Italian vinaigrette. This salad is vegetarian and easily vegan. Recipe yields 6 to 8 side servings or 3 to 4 meal-sized servings (a lot). If you store the salad separately from the vinaigrette, it will keep well for up to 4 days.

Ingredients

  • 10 ounces chopped romaine lettuce* (about 2 medium or 3 small heads, chopped)
  • ½ medium head of radicchio*, finely chopped (about 2 cups)
  • ½ medium red onion, chopped (about 1 cup)
  • 2 ribs celery, chopped
  • 1 pint cherry tomatoes, thinly sliced
  • ⅓ cup stemmed and thinly sliced pickled pepperoncini peppers
  • ⅓ cup oil-packed sun-dried tomatoes, rinsed and roughly chopped
  • 1 can (15 ounces) chickpeas, rinsed and drained, or 1 ½ cups cooked chickpeas
  • 1 cup (4 ounces) ¼″ cubes of provolone cheese (optional)

Instructions

  1. In a large serving bowl, combine the chopped lettuce, radicchio, onion, celery, cherry tomatoes, peppers, sun-dried tomatoes, chickpeas and cheese (if using). Toss the ingredients together and set aside.
  2. To prepare the dressing, combine all of the ingredients in a liquid measuring cup. Whisk until blended. Taste, and add more salt if the dressing doesn’t knock your socks off (I usually add one to two more pinches of salt).
  3. If you’ll be serving all of the salad at once, go ahead and drizzle enough dressing in to lightly coat the salad and toss to combine. I prefer to store the salad and dressing separately so I can enjoy salad for a few days. Just whisk the dressing again before drizzling (if the olive oil solidifies a bit in the refrigerator, don’t worry, that’s normal—just let it warm up for about 5 minutes at room temperature or microwave for 10 to 20 seconds).

Nextcloud change server URL on PC Client

Changing the server address in

~.local/share/data/Nextcloud/nextcloud.cfg
on Linux

&

User\AppData\Local\Nextcloud\nextcloud.cfg
on Windows

  1. Close nextcloud client
  2. Search the file “nextcloud.cfg”
  3. Look for the line:
    0\url= ” ”
  4. Replace the URL between the commas with the new server address
  5. Save File
  6. Restart Nextcloud

ublock filter facebook first ad

0

Figured out that facebook uses two different div’s generator for the first sponsored ad and the subsequent on the timeline.

created this filter list for uBlock at least to clean the first ads

###u_ps_0_0_a > .userContentWrapper._5pcr > ._q7o._1w_m._1dwg   
###u_ps_0_0_b > .userContentWrapper._5pcr > ._q7o._1w_m._1dwg   
###u_ps_0_0_c > .userContentWrapper._5pcr > ._q7o._1w_m._1dwg   
###u_ps_0_0_d > .userContentWrapper._5pcr > ._q7o._1w_m._1dwg   
###u_ps_0_0_e > .userContentWrapper._5pcr > ._q7o._1w_m._1dwg   
###u_ps_0_0_f > .userContentWrapper._5pcr > ._q7o._1w_m._1dwg   
###u_ps_0_0_g > .userContentWrapper._5pcr > ._q7o._1w_m._1dwg   
###u_ps_0_0_h > .userContentWrapper._5pcr > ._q7o._1w_m._1dwg   
###u_ps_0_0_i > .userContentWrapper._5pcr > ._q7o._1w_m._1dwg   
###u_ps_0_0_j > .userContentWrapper._5pcr > ._q7o._1w_m._1dwg   
###u_ps_0_0_k > .userContentWrapper._5pcr > ._q7o._1w_m._1dwg   
###u_ps_0_0_l > .userContentWrapper._5pcr > ._q7o._1w_m._1dwg   
###u_ps_0_0_m > .userContentWrapper._5pcr > ._q7o._1w_m._1dwg   
###u_ps_0_0_n > .userContentWrapper._5pcr > ._q7o._1w_m._1dwg   
###u_ps_0_0_o > .userContentWrapper._5pcr > ._q7o._1w_m._1dwg   
###u_ps_0_0_p > .userContentWrapper._5pcr > ._q7o._1w_m._1dwg   
###u_ps_0_0_q > .userContentWrapper._5pcr > ._q7o._1w_m._1dwg   
###u_ps_0_0_r > .userContentWrapper._5pcr > ._q7o._1w_m._1dwg   
###u_ps_0_0_s > .userContentWrapper._5pcr > ._q7o._1w_m._1dwg   
###u_ps_0_0_t > .userContentWrapper._5pcr > ._q7o._1w_m._1dwg   
###u_ps_0_0_u > .userContentWrapper._5pcr > ._q7o._1w_m._1dwg   
###u_ps_0_0_v > .userContentWrapper._5pcr > ._q7o._1w_m._1dwg   
###u_ps_0_0_w > .userContentWrapper._5pcr > ._q7o._1w_m._1dwg   
###u_ps_0_0_x > .userContentWrapper._5pcr > ._q7o._1w_m._1dwg   
###u_ps_0_0_y > .userContentWrapper._5pcr > ._q7o._1w_m._1dwg   
###u_ps_0_0_z > .userContentWrapper._5pcr > ._q7o._1w_m._1dwg   
###u_ps_0_0_x > .userContentWrapper._5pcr > ._q7o._1w_m._1dwg

Quill to Maya to RS

0
  1. Export de Quill como FBX
  2. Import FBX en Maya 2015+
  3. Cargar Vertex Shader en Hypershade
  4. Asignar a todos los objetos Poly
  5. Ocultar Nurbs Objects
  6. Activar Hardware 2.0
  7. Duplicar Vertex Shader quitando el NODE de ALPHA
  8. Aplicar en todo lo que no tenga ALPHA para el GEO SORTING
  9. Generar RS Material
  10. Agregar Vertex Color igual que el nombre del Cset
  11. Conectar el Outcolor al Diffuse
  12. Ya funca en RS
  13. (NOTA): Si desaparece la geometría al animar la cámara, hay que seleccionar todos los objetos POLY y revisar que VISIBILITY no esté animado. Si está animado, quitar el keyframe y convertir en ON

PARA MAS INFO

Convert FinalDraft/CELTX Screenplay PDF to Kindle

0


First: Download “k2pdfopt” (alt download)
Export your script in PDF format.
Open k2pdfopt and import the pdf file (don’t worry it won’t over write the pdf)

Select the following settings all default unless specified here: “smart line breaks: 0.200” “Max Columns 1” “re-flow text” “erase vertical lines” “erase horizontal lines” “fast preview” “fixed output font size 10.0” – you can adjust font size here “OCR (Tesseract) 50%) – optional”

In the top right corner, specify which Kindle you have, I for instance have Kindle Paperwhite, and the conversion mode should be left at default.
Before you “Convert All Files”, you can preview the page by using the preview button in the bottom right corner (helpful for finding the perfect preference for your scripts).

Once you’ve done all this and are happy, hit “Convert All Files”.
It will create a new PDF out of image files that you can in turn send to your Kindle.

Notes: Before sending the PDF to your Kindle, I suggest scrolling through it to check for any artifacts or obscure formatting and text sizes. This can be adjusted by using the “fixed output font size” and previewing the pages you have with issues before hand. I’ve found 10.0 size to be the best for Kindle, sometimes it’s even okay with it off, but it’s bigger.

If you have any compatibility issues when sending it to Kindle, you can run the new PDF through a program called Calibre. It’s a free program made especially for converting files to eBooks. All you need to do in it is import your new PDF, right click on it, select publish book > publish individually, and then specify what format to export it as (top right corner), and play with whatever else your heart desires.


That’s it. I hope this was helpful. Feel free to fiddle with the settings how you’d like, each script may vary in adjustments. Here are example of what the end result looks like: https://imgur.com/a/qF61B

Yet another Quote

0

Albert Einstein was a German-born theoretical physicist who developed the theory of relativity, one of the two pillars of modern physics (alongside quantum mechanics). His work is also known for its influence on the philosophy of science. He is best known to the general public for his mass–energy equivalence formula E = mc2, which has been dubbed “the world’s most famous equation”.[9] He received the 1921 Nobel Prize in Physics “for his services to theoretical physics, and especially for his discovery of the law of the photoelectric effect”, a pivotal step in the development of quantum theory.

Near the beginning of his career, Einstein thought that Newtonian mechanics was no longer enough to reconcile the laws of classical mechanics with the laws of the electromagnetic field. This led him to develop his special theory of relativity during his time at the Swiss Patent Office in Bern (1902–1909). However, he realized that the principle of relativity could also be extended to gravitational fields, and he published a paper on general relativity in 1916 with his theory of gravitation. He continued to deal with problems of statistical mechanics and quantum theory, which led to his explanations of particle theory and the motion of molecules. He also investigated the thermal properties of light which laid the foundation of the photon theory of light. In 1917, he applied the general theory of relativity to model the structure of the universe.

Except for one year in Prague, Einstein lived in Switzerland between 1895 and 1914, during which time he renounced his German citizenship in 1896, then received his academic diploma from the Swiss federal polytechnic school (later the Eidgenössische Technische Hochschule, ETH) in Zürich in 1900. After being stateless for more than five years, he acquired Swiss citizenship in 1901, which he kept for the rest of his life. In 1905, he was awarded a PhD by the University of Zurich. The same year, he published four groundbreaking papers during his renowned annus mirabilis (miracle year) which brought him to the notice of the academic world at the age of 26. Einstein taught theoretical physics at Zurich between 1912 and 1914 before he left for Berlin, where he was elected to the Prussian Academy of Sciences.

Soundcloud Track

0

John William Coltrane was an American jazz saxophonist and composer. Working in the bebop and hard bop idioms early in his career, Coltrane helped pioneer the use of modes and was at the forefront of free jazz. He led at least fifty recording sessions and appeared on many albums by other musicians, including trumpeter Miles Davis and pianist Thelonious Monk.

Over the course of his career, Coltrane’s music took on an increasingly spiritual dimension. He remains one of the most influential saxophonists in music history. He received many posthumous awards, including canonization by the African Orthodox Church and a Pulitzer Prize in 2007. His second wife was pianist Alice Coltrane and their son, Ravi Coltrane, is also a saxophonist.

Fix bad IK Snap TSMG – FK/IK Switch

0

To fix the TSMG bad FK/FK Snap

  1. Buscar el CTRL que no funciona en éste ejemplo es el LEFT ARM
    leftArm1_ArmIKControl
  2. Buscar su IKHANDLE

    leftArm1_ArmIKHandle
  3. PONER sus TRANSLATE X Y Z en 0

Max 2014 does not start after workspace_1__usersave__.mnux invalid

0

Si 3dsmax no inicia o crashea después del siguiente error:

Max 2014 does not start after workspace_1__usersave__.mnux invalid

Hay que renombrar el folder UI de:
C:\Users\USUARIO\AppData\Local\Autodesk\3dsmax\2015 – 64bit\ENU\en-US\
para que no lo lea MAX y reiniciar.

Ahora ya arranca