Been using my headphones for a little more than 3 months, for swimming and running. Sadly they died, contacted Sanag for repairs and they said it wasn’t under warranty, so I decided to take a “dive” and fix them.
Seems that the issue was that the right ear glue was not very good and didn’t withstand the chlorine, sweat mix so the water leaked into the transducer and damaged it beyond repair.
Fortunately the transducer is a cheap 16mm 8ohm 1W transducer that you can get over on Aliexpress.
https://es.aliexpress.com/item/1005009801031248.html
The replacement is easy, remove the silicon cap, take the OG transducer out, clean out the inside, desolder.
Place the replacement transducer, solder, thermofit for safety and just pack it up.
Apply B-7000 it so it becomes waterproof again.
I also applied some UV resin because i thought the damage was on the cable.
